• <track id="c2xpa"></track>

      <samp id="c2xpa"></samp><track id="c2xpa"><div id="c2xpa"></div></track>
        <bdo id="c2xpa"></bdo>
          <track id="c2xpa"></track>

          1. <bdo id="c2xpa"><strong id="c2xpa"><menu id="c2xpa"></menu></strong></bdo>

            1. Amp

              Amp features a built-in state-of-the-art digital amplifier that can power large or small speakers so you can enjoy superior audio in any room.

              Controls and lights

              Swipe, touch, or tap—with Amp you’ve got choices on how to control the sound.

              Note:See The Sonos app for more information on how to use our app.

               

              Status light

              Indicates the status. For more information, see http://faq.sonos.com/led.

              el_rey_volume.jpg 

              Volume control

              Touch for small adjustments or touch and hold to quickly change the volume:

              • Volume up (right)

              • Volume down (left)

              Note:You can also use our app or your remote control.

              el_rey_play_pause.jpg 

               

              Play/Pause

              Touch to play or pause sound.

              • TV—When the TV is on, touch ALL_play_pause.jpg to toggle the sound on and off.

              • Music—When the TV is off, touch ALL_play_pause00138.jpg to pause or restart music.

              swipe_controls.jpg 

              Next/Previous

              (Music only)

              • Swipe right across the touch controls to skip to the next song.

              • Swipe left to go to the previous song.

              Note:You can’t skip forward or go back when listening to a radio station.

               

              IR sensor

              The IR (InfraRed) sensor receives signals sent by a remote control.

               

               

              Connector panel

              ALL_Amp_back.jpg

               

              HDMI ARC

              Use an HDMI cable to connect Amp to your TV’s HDMI ARC port.

              Join button

              Press to connect during setup.

              AC power (mains) port

              Use only the supplied power cord (using a third-party power cord will void your warranty).

              Note:Insert the power cord firmly.

              Analog audio in

              Use a standard RCA audio cable to connect Amp’s analog audio inputs to the audio outputs from a separate audio component, such as a turntable or a portable music player.

              Ethernet ports (2)

              Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).

              Subwoofer output

              Note:If you disconnect your subwoofer, make sure to also disconnect the subwoofer’s cable from the Amp output.

              Connect a powered subwoofer to this output using a standard RCA cable. The system will detect when a cable is connected to the subwoofer output and adjust the crossover frequency automatically.

              Speaker terminals

              Use high-quality speaker wire to connect your speakers to Amp.

               

              What can you do with Amp?

              Play music through your favorite speakers

              Connect your favorite bookshelf, floor-standing, in-wall, or in-ceiling speakers to Amp to stream all the music you love. Connect a turntable, stereo, or portable music player and play the sound on any Sonos speaker.

              Enhance your TV sound

              Connect Amp to your TV to create the ultimate entertainment system.

              (For even deeper sound, add a Sonos Sub or connect a third-party subwoofer.)

              See Connect Amp to your TV for setup information.

              Select a location

              You can place Amp just about anywhere— in an electronics rack, on a shelf, or on a credenza with your TV.

              Rack mounted

              Placed on a credenza

              Connect the cables

              Attach desired speakers

              Your speakers’ power rating should be at least 125W for 8 ohm speakers, and at least 200W for 4 ohm speakers. Do not connect speakers rated at less than 4 ohm.

              Note:Amp can drive speakers with nominal impedance above 4 ohms. Two pairs of 8 ohm speakers wired in parallel are also supported. Don’t wire your speakers in series because it will result in poor sound quality.

              1. Remove the cap from the banana plug to reveal the connection hole.

              2. Insert the stripped end of the speaker wire into the hole, then return the cap to the banana plug to secure the connection.

              3. Note:Connect the red (+) and black (-) terminals from each speaker to the corresponding banana plug and terminal on Amp. Mismatching of polarities will result in weak central sound and a distorted sense of sound direction.

              4. Insert the banana plug into the proper speaker terminal on the back of Amp.

              5. Repeat to install the other speaker wires.

              Connect the power cord

              Attach the power cord and plug in Amp.

              You’ll use our app to set up and control your Sonos system. If you don’t have the Sonos app, download it from your app store. See Controls and lights.

              Connect Amp to your TV

              Use an HDMI cable to connect Amp to your TV. When connected, Amp creates two front audio channels and plays your TV sound through your favorite non-Sonos speakers.

              Note:You may need the optical adapter too (the app lets you know).

              1. Fully insert the HDMI cable into Amp’s HDMI port.

              2. Connect the HDMI cable to your TV. You have two choices:

               

              If your TV has an HDMI ARC port

              HDMI ARC is a special port that looks like a standard HDMI port. Although they look the same, if you connect to a standard HDMI port, you won’t hear sound.

              1. On your TV’s audio OUT panel, locate the HDMI ARC port.

              2. It may be on the back or side of your TV. Look for the port with “ARC” on the label.

                Find_Arc_BACK.jpg
              3. Connect the HDMI cable to the TV’s HDMI ARC port.

              Note:If you can’t find a port with the word “ARC” on the label, your TV doesn’t have an HDMI ARC port. See If your TV doesn’t have an HDMI ARC port.

               

              If your TV doesn’t have an HDMI ARC port

              You’ll need the optical audio adapter.

              1. Remove the protective cap from the optical adapter.

              2. Attach the optical adapter to the HDMI cable.

                OpticalAdapter.jpg
              3. Connect the optical adapter to the TV’s optical digital OUT port.

              Note:The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable.

              You’ll use our app to set up and control your Sonos system. If you don’t have the Sonos app, download it from your app store. See Controls and lights.

              Line-in

              Connect an external source like a phono preamp (your turntable may have a built-in phone preamp), or other audio device. Learn more.

              Change from stereo to mono

              Amp plays audio in stereo by default. You can change the sound settings for the room associated with the Amp so that it plays in two mono channels when playing music.

              Specifications

              Feature

              Description

              Audio

              Amplifier

              Class-D digital amplifier

              Amplifier power

              125W/Ch into 8 ohms

              Speaker Connections

              Banana plugs (2)

              Line-In Sources Supported

              Audio device with analog RCA output or optical output (optical adapter required). TV device with HDMI ARC or optical output (optical adapter required).

              Subwoofer Output

              Auto-detecting RCA type, adjustable crossover

              Networking

              Wireless Connectivity

              Connects to your home WiFi network with any 802.11 b/g/n router.

              802.11n only network configurations are not supported—you can either change the router settings to 802.11 b/g/n or connect a Sonos product to your router.

              Ethernet Ports

              Dual Ethernet ports can connect Amp to a wired home network and allow for connection of additional Sonos players.

              General

              System Requirements

              Passive speakers with speaker wire, broadband internet, and Sonos app.

              Power Supply

              Auto-switching 100-240V, 50-60 Hz AC universal input.

              Controls

              Touch interface with volume up/down, previous/next track and play/pause.

              Status indicator

              Light indicates Amp status.

              Dimensions (H x W x D)

              2.52 x 8.54 x 8.54 in. (64 x 217 x 217 mm)

              Weight

              4.6 lbs. (2.1 kg)

              Operating Temperature

              32°F to 104°F (0°C to 40°C)

              Storage Temperature

              -4°F to 122°F (-20°C to 50°C)

              Product Finish

              Black

              Package Contents

              Sonos Amp, Sonos banana plugs (2), AC power cord, and Quickstart Guide.


              * Specifications subject to change without notice.

               

               

              小明看国产